Finn-Power NC- 기계는 업계에서 가장 신뢰할 수 있고 널리 사용되는 너트 크림 핑 기계로 입증되었습니다. NC 기계는 피팅 제조를 위해 빠르고 정확한 크림 핑을 제공합니다. NC20은 크림 핑 길이가 짧은 다른 용도에도 사용할 수 있습니다. 커넥터, 소형 호스, 링, 튜브 및 센서. 조정 가능한 백 스톱을 통해 다양한 제품을 빠르게 설정할 수 있습니다. 페룰 크기에 따라 선택된 특수 센터링 핀을 크림 핑 중에 사용할 수 있습니다. 별도의 크림 핑 헤드와 유압 장치가있는 Z 모델로도 제공됩니다.
Foot pedal (Z-model)
Auto greasing G3
Oil cooler **
** Will have impact on motor size, hydraulic unit dimensions and weight.
Quality control ICC3
Graphical quality control ICC4
Remote control unit
Interface pack ETH (Communication TCP/IP & UDP)
Bar Code Reader BCR
Technical Data
TECHNICAL DATA
Crimping range (mm) ¹
12-49
Crimping range (inch) ¹
0.47-1.93
Max crimping force (kN)
500
Max crimping force (tonnage)
50
Cycle time 10 mm (s) ²
1.5
Hose size ID (inch)
1 1/4
Die set series
NC20
Max. opening (mm) ³
+18
Max opening without dies (mm)
117
Master die D/L (mm)
99/22
Master die D/L (inch)
3.90/0.87
Motor Power (kW/HP)
3.0/4.0
Oil tank volume
32 l
Z-model availability
Yes
DIMENSIONS (LxWxH)
Standard (mm)
835x885x997
Standard (inch)
32.9x34.8x39.3
Z-model head (mm)
321x340x395
Z-model hydraulic unit (mm)
597x436,5x651
Z-model head (inch)
12.6x13.4x17.2
Z-model hydraulic unit (inch)
25.6x17.2x23.5
WEIGHT (KG/LBS)
Standard
287/485
Z-model head
113/249
Z-model hydraulic unit
103/227
1) With standard dies. Crimping range can be increased with special dies.
2) Theoretical with 10mm cycle.
3) Maximum opening is the total die travel. Add this value to the minimum crimping diameter of the die set used. The result is the maximum opening of the machine with die set in place.
Die Set NC20-series
DieSetNo
D (mm)
L (mm)
Crimp. range (mm)
18546/12
12
3
12.0-16.0
18546/16
16
4
16.0-22.0
18546/22
22
4.5
22.0-27.0
18546/27
27
5
27.0-34.0
18546/34
34
5
34.0-41.0
18546/41
41
5
41.0-49.0
In addition to the standard die sets, a wide range of special die sets is available on request.